完美世界txt下载,盗墓笔记有声小说

寧波瞬能的生產環境濕度控制（鋰電）

Marketing Munters — Thu, 30 Jan 2020 03:35:12 +0000

寧波瞬能的生產環境濕度控制（鋰電） Marketing Munters 2020/01/30

寧波瞬能的生產環境濕度控制（鋰電）

寧波瞬能科技有限公司成立于2018年，是一家致力于能量快速存儲及釋放的整體解決方案高新技術企業。主要從事超快充電池電極、超快充單體以及超快充儲能系統的研發、制作和銷售。公司擁有超快充電池核心技術，具備年產3500萬只超快充電池系列生產能力。

在用戶生產過程中，濕度控制是至關重要的。在保障生產不間斷前提下，穩定的濕度控制決定了產品的合格率以及性能。用戶需保證生產環境濕度至少在-40℃以下（送風濕度在-60℃以下），且濕度越低越能保證產品的穩定性與合格率。除此之外，用戶生產區域只能使用電能，能耗支出非常大，故而對產品的能耗也有較高的要求。

蒙特的出現，很好的幫助用戶解決了當前的難題。蒙特轉輪除濕系統基于多年的創新技術與廣泛的全球應用經驗，特別適合于低溫和低濕工況，甚至可在超低露點（-80℃以下）工況下進行穩定且高效的除濕作業。并且，蒙特轉輪使用了多種創新Purge技術，可為用戶節能更高可達40%。

設備投入運行后，用戶可以精確的控制自己生產所需的濕度。此外，用戶的能耗開支節省也十分可觀。經實際運行統計，運用蒙特轉輪除濕系統（2臺）每年可以為用戶節省電費約250,000元，節能效率達到30%以上。

“項目伊始，我們非常認真的聽取了蒙特講解其產品所使用的LDP節能技術以及露點控制能力，這非常適合我們這種對濕度控制要求高且對能耗敏感的企業” 生產部負責人說， “從前期的現場勘測，到方案制定，再到模擬實驗與后期的培訓，蒙特都表現的非常專業，我們對項目的驗收與實際運行效果感到非常滿意”。

目前蒙特的2臺除濕設備仍然在穩定運行中，且已順利通過用戶要求的6個月不停機連續生產的驗收。

除濕干燥設備為美國鋰電池生產實驗室設計露點濕度極低的烘干房

munters_admin — Sat, 26 Aug 2017 16:00:01 +0000

除濕干燥設備為美國鋰電池生產實驗室設計露點濕度極低的烘干房 munters_admin 2017/08/27

除濕干燥設備為美國鋰電池生產實驗室設計露點濕度極低的烘干房

Developing a dry room for an advanced lithium-ion battery production lab is a precise task requiring ultra-low dew point levels. The task becomes monumental when that lab project also required renovating an existing space, isolating it from the rest of an occupied building and placing needed mechanical equipment two floors above. Working together, the teams from Scientific Climate Systems (SCS), Munters and Innovative Air Systems provided the expertise needed to design and develop a world-class lab and ensure consistent and accurate conditions were met. The setting for this complex assignment is the University of Michigan Energy Institute's Battery Lab in Ann Arbor, Mich. The facility offers university researchers, materials scientists and engineers, as well as suppliers and manufacturers, state-of-the-art equipment to develop less expensive and longer lasting energy-storage devices for grid storage, transportation and consumer products. “Our primary focus in the dry room is electrolyte filling and final cell assembly for lithium-ion batteries,” said Greg Less, Ph.D., senior laboratory manager with the University of Michigan Energy Institute. “Having a moisture-free environment is essential for longevity and safety in lithium-ion batteries.” Houston-based SCS, specializes in designing and installing precise low humidity environmental conditions for dry rooms, with more than 200 installations worldwide, was selected to design and build the dry room. The work encompassed a complete integration, mechanical systems, controls for monitoring and dapting to ambient conditions and all the equipment needed to achieve design requirements.

Lab Design Challenges

Developing the 700-square foot lab presented several unique challenges. For one, the project required converting an existing, second story space in a three-story building into a dry room.

“The building functions as a multi-purpose research and study facility, and the laboratory was to be installed in a space that was used for study work areas,” said David Parkman, senior project engineer with Scientific Climate Systems. “Installing this lab meant totally isolating the area from the surrounding adjacent spaces and hallway.”

Second, the mechanical equipment had to be located on the roof and connected to the second floor of the building without disturbing occupants on the third floor.

In addition, all of the equipment had to be specified to fit on the available roof space and designed to operate with minimal sound and visual impact.

The design of the lab took more than a year with several meetings to review design concepts and details to the installation schedule and coordination with a local contractor to arrange space on the roof and use of an industrial crane to lift the mechanical equipment in place.

Based on the size and activity within the room, design conditions were set at 70°F and ≤ -40°C dew point or ≤ 0.5% relative humidity. Holding these conditions was essential as high energy lithium-ion batteries must be produced in environments with less than one percent relative humidity to prevent hydrolysis of the electrolyte salt.

Lab staff also wanted the benefit of windows in the dry room to correspond with the building windows for natural light. With the separation of mechanical equipment on the roof and the dry room two levels below, the supply air conditions from the dehumidification system must be maintained to provide the drying capacity needed to control the space at 70°F, ≤ -40°C dew point or ≤ 0.5% relative humidity.

“We had to accommodate the needs of the lab but also work around other areas between the mechanical equipment location and the dry room site,” said Parkman. “Therefore, the supply air ductwork needed to be equally vapor tight, as well as the return air.

“We have to hold a lab that’s surrounded by rooms at 75°F and 60% relative humidity at a half of percent relative humidity,” added Parkman. “That differential makes the integrity of that dry room critical, and we had to ensure every seam was precisely sealed.”

Where there were other functional areas within the building, multiple small access hatches were required in the dry room to adjust utilities associated with these rooms and other labs. These had to be gasket sealed along with the room enclosure to maintain conditions.

“Because this space wasn’t ever really meant to be a dry room, let alone a lab, there were several panels needed inside of the room to allow access to control valves and shut off switches for building services that had to be incorporated into the design,” said Less.

SCS utilized its extensive experience to incorporate quality insulated panels and sealed all joints to provide a vapor tight enclosure. In addition, all penetrations for sprinklers, electrical power and compressed air were sealed with the same quality control as the room. Lab staff gain access to the dry room by entering and exiting
through an airlock to prevent moisture infiltration from outside sources.

With proper sealing in place, the dry room requires only 200 CFM of positive pressure to avoid moisture infiltration that would affect conditions inside. To achieve this level of control required a large amount of mechanical equipment, including an advanced dehumidification system, all strategically placed on the building’s rooftop.

Munters Dehumidification System Delivers

The design criteria and expected activity within a dry room determine the equipment performance requirements. For the University of Michigan Battery Lab, the supply air temperature and moisture needed to be lower than the design set point to accommodate three sets of conditions: the internal sensible and latent loads from the number of people working in the space, any exhaust air from workstations, and the heat load from people, processing equipment and lights.

“The Munters Green PowerPurge desiccant system was chosen as the central component of the mechanical system because it’s specifically designed to meet the needs of advanced battery manufacturers requiring low dew point control, while at the same time consuming less energy than other systems,” said Jeff Siemasko, Munters director of sales, North America.

“The Green PowerPurge high performance desiccant system uses the least amount of energy possible, and was precisely developed for the low dew point application required by the lithiumion battery dry room industry,” said Curtis Musall, president of Innovative Air Systems and SCS OEM account manager for Munters.

The Green PowerPurge is energy efficient because the unit acts as an energy recovery system, collecting waste heat off of the hottest section of the desiccant wheel and using it to help with the regeneration. This process reduces the energy required for reactivation, while lowering the discharge temperature of the process air, decreasing energy costs for post cooling the air being delivered to the dry room.

“Green PowerPurge easily can supply dew points at -70°F/-56°C supply air while saving between 25% and 45% of the dry room cooling cost and 35% to 50% of desiccant reactivation energy cost,” said Musall.

The Munters dehumidification system effectively and efficiently controls the dew point and the unit’s refrigeration provides the initial stage of temperature and moisture removal before the final drying through the dehumidifier for the supply air to the dry room.

Results: Lab Conditions Exceeding Expectations According to Less, conditions in the facility have actually exceeded expectations.

“Our humidity is usually lower than the spec by quite a bit,” said Less. “We are easily able to monitor conditions via a digital readout outside the room that also is connected into the University building monitoring system.”

“The support provided by Curtis and the Munters team in confirming the design features and performance was essential to the success of the project,” said Parkman. “Munters has been providing energy-efficient dehumidification systems for this application for nearly 40 years and has been our source for these dry room design specifications.

“Munters quality and performance are consistent with our requirements in designing the facility to control these extreme conditions,” added Parkman. “Where the installation requires total integration, Munters supplied the dehumidification system and Innovative Air Systems provided the refrigeration equipment needed to match the dry room/dehumidification system requirements.”

“Scientific Climate Systems worked with us to make sure we received the exact type of lab that we wanted and made sure we understood all of the parameters,” said Less. “Working together we developed a fantastic, world-class space for our customers to produce batteries.”

事實瀏覽

Complete supply and installation of a dry room
Consistent and accurate conditions optimized for battery production
Ultra-low dew point of less than 0.5% relative humidity
Cutting edge mechanical design including Green PowerPurge? system for increased energy efficiencies

電子產品保護

munters_admin — Fri, 25 Aug 2017 07:10:02 +0000

電子產品保護 munters_admin 2017/08/25

空氣溫濕度控制

munters_admin — Fri, 25 Aug 2017 06:15:50 +0000

空氣溫濕度控制 munters_admin 2017/08/25

實驗室和無塵潔凈室濕度控制

munters_admin — Fri, 25 Aug 2017 05:54:08 +0000

實驗室和無塵潔凈室濕度控制 munters_admin 2017/08/25

冷凝

munters_admin — Fri, 25 Aug 2017 05:35:29 +0000

冷凝 munters_admin 2017/08/25

腐蝕

munters_admin — Sun, 20 Aug 2017 13:55:16 +0000

腐蝕 munters_admin 2017/08/20

為華威大學的鋰電池材料測試生產線設計實驗室干燥室轉輪除濕機

munters_admin — Wed, 19 Jul 2017 15:37:55 +0000

為華威大學的鋰電池材料測試生產線設計實驗室干燥室轉輪除濕機 munters_admin 2017/07/19

為華威大學的鋰電池材料測試生產線設計實驗室干燥室轉輪除濕機

華威大學能源創新中心設有一間電池鑒定實驗室并且有電動/混合動力驅動測試設施。中心設備先進，裝有一條價值1300萬歐元的電池材料試點生產線，便于進行新型電池一站式研發，為汽車、發電廠、消費性電子產品等應用情景進行詳細的產業評估。

華威大學能源創新中心設備先進，裝有一條價值1300萬歐元的電池材料試點生產線，便于進行新型電池一站式研發，為汽車、發電廠、消費性電子產品等應用情景進行詳細的產業評估。

蒙特的專業空氣處理團隊為中心設計、制造并安裝了節能干燥室，內置蒙特的高效MDU系統，設計核心在于其創新的熱回收方案。

蒙特的設備讓露點溫度始終保持 -45℃，為實驗室提供穩定環境，使電解液盡可能保持干燥，這是生產和測試軟包鋰電池的關鍵一步，因?yàn)樽⒁簳r水分子的進入會損害電池性能。

蒙特MDU系統位于干燥室旁，用于維持環境條件恒定，另外采用西門子綜合控制系統監控水分含量。蒙特MDU2000內設高效節能方案，空氣處理系統的核心是干燥劑轉輪。

干燥室是試點生產線的一部分，9m x 5m的空間可容納六名工作人員，相對濕度低于1%，露點溫度保持-45℃。

干燥室內備有制造軟包電池所需的所有設備。電池材料的濕敏特性可能在以下步驟帶來潛在問題：
-- 電極烘干與剪切
-- 電池組組裝
-- 包裝
-- 注液

蒙特MDU系統位于干燥室旁，用于維持環境條件恒定，另外采用西門子綜合控制系統監控水分含量。蒙特MDU2000內設高效節能方案，空氣處理系統的核心是干燥劑轉輪除濕機。

電池

干燥室

轉輪除濕機

事實瀏覽

精準調節并維持穩定環境條件
提供干燥室建設交鑰匙工程
-45℃的超低露點溫度
先進設計
MDU2000除濕機
精準監測與控制，操作簡便友好
節能

全套空氣處理機組為英國電池生產廠家減少二氧化碳排放量和能耗

munters_admin — Wed, 19 Jul 2017 15:28:19 +0000

全套空氣處理機組為英國電池生產廠家減少二氧化碳排放量和能耗 munters_admin 2017/07/19

全套空氣處理機組為英國電池生產廠家減少二氧化碳排放量和能耗

奎奈蒂克（QinetiQ）廠內先進電池系統用節能型、低露點環境干燥室

在為航空航天工業及國防與安全工業內的客戶提供以技術為導向的、獨立的建議和服務方面，奎奈蒂克（QinetiQ）是專業服務商。總部設在英國的奎奈蒂克（QinetiQ）電源研發團隊和全球多個產業及學術合作伙伴一起研發先進的電池系統。

為加強其自身的競爭力，奎奈蒂克（QinetiQ）要求蒙特設計一個新的空氣處理系統，以實現電池生產干燥室內低露點的環境條件，同時降低現有的能源消耗水平及碳排放水平。以下即是蒙特空氣控制系統專家如何實現這個目標的：

背景

生產諸如鋰離子電池等先進的電池系統需要很干燥的環境條件。電池系統部件對濕氣極端敏感，并且會迅速地與空氣中哪怕是最微量的濕氣發生反應。事實上，如果生產環境條件沒有嚴格控制在干燥狀態下，與濕氣相關的損壞或變質可能會在分分鐘內發生。隨著技術進步及降低能源消耗的需要，奎奈蒂克（QinetiQ）交給我們的挑戰是：交付一個可靠的空氣處理系統，該系統要保持現有系統的性能，但消耗更少的能源。

因此蒙特設計了一個替代方案，該方案可以在實現低露點環境條件的同時，保持運行效率。該替代系統的主要目標是：在-25°C露點溫度及-40°C露點溫度（根據不同的運行要求）之間，實現并保持低露點，減少能源消耗，實現3年之內回收投資。無論外界環境條件如何，該系統應持續保持設定的環境條件。

設計

通過與奎奈蒂克（QinetiQ）的緊密合作，蒙特的專家團隊采用蒙特MDU模塊化技術，在一個現有的系統上進行工程改進，從而實現一個定制的整套空氣處理系統。蒙特MDU2000是一個低露點系統，該系統包含制冷裝置、供熱裝置、冷水機組、管道系統及控制機構，具有節能的特性。該低露點系統配備了蒙特的PowerPurge?系統，這是一個具有專業技術的能量回收系統，已經被證明能夠減少能源消耗高達30%。該定制的MDU2000系統運行時采用經過預冷的空氣，這些經過預冷的空氣已經被部分除濕（通過制冷的方式），然后這部分空氣會被輸送而通過干燥輪（轉子）區域。部分空氣通過purge區域時會被進一步的除濕，然后這部分空氣會被輸送到再生區域。

在利用從purge區域（除濕過程產生熱量）回收而得到的熱量，以減少再生加熱器所需要的能源的同時，該系統整體上保持了所要求的干燥性能。通過采用蒙特PowerPurge?系統，從根本上保證了該系統可以以更節能的方式來實現相同的環境條件。除了能夠形成一個更節能的系統之外，MDU2000系統還有一個安裝在墻面上的低露點監控器。如果環境條件變化到規定的露點以下，系統會向運行人員報警，以使運行人員能夠?qū)φ麄€系統進行嚴格的控制和管理。在回風管道上安裝了一個傳感器，確保整個房間都保持恒定的環境條件。

空氣處理機組

電池

空氣處理系統

事實瀏覽

減少CO2排放
實現低露點
穩定的環境條件
減少能源消耗
低露點監控及報警
模塊化系統
PowerPurge?技術

ML系列獨立式工業環保轉輪除濕機

munters_admin — Sat, 01 Jul 2017 21:08:18 +0000

ML系列獨立式工業環保轉輪除濕機 munters_admin 2017/07/02

除濕機 / 單體除濕機

ML系列獨立式工業環保轉輪除濕機

ML系列轉輪除濕機

ML系列獨立式工業環保轉輪除濕機是綜合型室內空氣除濕設備，集成了空氣濕度調節器，可選用冷凝設備，如大型設備上的氣體再生系統。ML系列除濕干燥機的額定風量范圍是180 - 2300 m³/h。

ML系列工業環保轉輪除濕機的占地面積更小
ML系列為塑料轉輪外殼結構，耐腐蝕
環保轉輪除濕機的有效除濕溫度可達-20oC
轉輪除濕后可達到低露點
環保轉輪除濕機的前后面板可交換，易安裝
ML17型號和ML23型號工業環保轉輪除濕機可選不銹鋼外殼

ML除濕轉輪

HPS高效硅膠轉輪，蒙特主力轉輪之一，可覆蓋90%的干燥領域。蒙特公司開發的轉輪生產工藝及方法，不僅使轉輪具有牢固的結構，同時還具備穩定的性能，可以為眾多領域提供理想的干燥環境：

硅膠是一種無毒、無味、化學性質極其穩定的惰性物質。具有極強的吸濕性，在空氣相對濕度100%時，單位吸附能力為其自重的40%；
具有第三方提供的殺菌認證，并且不會對處理空氣揮發出顆粒物；
即使空氣相對濕度達到100%，轉輪上的高效硅膠吸附劑也不會流失；
耐酸性、含硫物質及大多數化學制品的腐蝕；
全面可清洗

ML能量回收技術

ML全系列產品標配了蒙特的節能技術（Energy Recovery Purge）
與同行業其他產品相比，節能高達25%；

更多的節能應用，請咨詢蒙特應用工程師。

ML轉輪除濕機—緊湊結構設計

全球化的精心設計，除濕機的結構新穎，既可落地安裝，也適合掛壁安裝；
同等性能情況下，ML轉輪除濕機占地尺寸更小，可節省客戶內部空間；
原裝進口的內部密封轉輪部件，通過合理的應用方案，可輸出低至-45℃的露點溫度；
除濕機前后面板拆卸簡單，方便快速安裝和維護;
風管連接符合ISO13351標準，簡化風管的安裝;
可選配空氣冷卻冷凝器，ML轉輪除濕機適合無排濕場所的緊湊空間應用。（詳情請見ML-L系列產品資料）

ML多種再生方式可以選擇

電氣再生；
燃?xì)庠偕?；（部分型號?lt;/li>
蒸汽再生。（部分型號）

產品簡介

蒙特工業除濕轉輪

1950年代，瑞典發明家卡爾蒙特先生發明了工業轉輪除濕技術，并創建了蒙特公司。

自工業轉輪除濕技術誕生以來，蒙特公司不斷改進生產工藝和方法，使得蒙特工業除濕轉輪始終立于行業專業地位。

嚴格的第三方測試認證——蒙特工業轉輪除濕機具有抑菌效果，并且無任何揮發物質，蒙特已為全球高品質產品生產線和環境提供30多萬套工業轉輪除濕機，為各行業高品質產品和高品質生活提供更理想的空氣環境。

工業除濕機設備分類

空氣處理設備 -> 空氣除濕機 / 空氣除濕器 / 空氣除濕系統 -> 工業除濕機 / 工業除濕器
環控系統 -> 氣候環境溫濕度控制器 / 氣候環境溫濕度控制儀 / 氣候環境溫濕度控制系統
空氣處理設備 -> 全空氣處理機組 / 全空氣處理器 / 全空氣空調系統 / 全空氣空調機組 / 全空氣系統
空氣處理設備 -> 空氣干燥機 / 空氣干燥器 -> 工業干燥機

工業除濕機設備別稱

ML系列獨立式工業環保轉輪除濕機，ML系列獨立式工業除濕機，ML系列工業環保轉輪除濕機，ML系列帶濕度控制器獨立式環保空氣轉輪除濕干燥機，ML帶濕度控制器工業轉輪除濕干燥機，ML系列獨立式環?？諝獬凉駲C(jī)，ML系列干燥劑除濕機，ML系列工業用轉輪式除濕機

工業轉輪除濕機設備選型

230

460

690

920

1150

1380

1610

1840

2070

2300

完美世界txt下载,盗墓笔记有声小说

寧波瞬能的生產環境濕度控制（鋰電）

寧波瞬能的生產環境濕度控制（鋰電）

相關文檔下載

除濕干燥設備為美國鋰電池生產實驗室設計露點濕度極低的烘干房

除濕干燥設備為美國鋰電池生產實驗室設計露點濕度極低的烘干房

Lab Design Challenges

Munters Dehumidification System Delivers

事實瀏覽

電子產品保護

空氣溫濕度控制

實驗室和無塵潔凈室濕度控制

冷凝

腐蝕

為華威大學的鋰電池材料測試生產線設計實驗室干燥室轉輪除濕機

為華威大學的鋰電池材料測試生產線設計實驗室干燥室轉輪除濕機

電池

干燥室

轉輪除濕機

事實瀏覽

全套空氣處理機組為英國電池生產廠家減少二氧化碳排放量和能耗

全套空氣處理機組為英國電池生產廠家減少二氧化碳排放量和能耗

背景

設計

空氣處理機組

電池

空氣處理系統

事實瀏覽

ML系列獨立式工業環保轉輪除濕機

除濕機 / 單體除濕機

ML系列獨立式工業環保轉輪除濕機

ML系列轉輪除濕機

ML除濕轉輪

ML能量回收技術

ML轉輪除濕機—緊湊結構設計

ML多種再生方式可以選擇

產品簡介

工業除濕機設備分類

工業除濕機設備別稱

工業轉輪除濕機設備選型

ML系列獨立式工業環保轉輪除濕機設備選型

工業轉輪除濕機設備型號

相關文檔下載